Gluing the bass bar

So here we are working the sould of the little thing. The bass bar is the only stick glued to the inside of the instrument. I threw the piece of spruce that came with the kit directly into the fire oven and found a decent piece of quatersawn spruce that I had. So here we go. Tomorrow I´ll close the box. The top and the sides are already prepared for assembly. You can see that I´ve made a thin layer of hide glue at the edge. More about that tomorrow.
In the back, the little round things glued to the kork is going to be the spool clamps that I´ll use for clamping the box together. Y

graduating the back plate of the fiddle

The back was also to thin. Some places 1,9mm where I would have liked it to be 2,5mm. Whatcan I do? Go ahead and graduate and try to compensate the best I can. Anyways, most of the back was way thick, so it can only get better.
I have already decided that this is not a way to build a Violin/fiddle. As a professional I cant accept that the basic and most impostant part of the instrument is wrong right from the start. Its going to be a violin and its going to sing beautifully. Here I trust my capacities as an instrument maker, but at the same time it has made me take the decission that I have to make a violin from scratch. So I have ordered wood and more about that later.
So back to scraping. Lots of scraping. Fortunately I know how to set up a scraper and maple is such a joy for a scraper freak like me. I listened to the Chieftains 4 and to Kevin Burke "if the cap fits" and lilted a few tunes while I scraped along. There´s no better way for me to forget the outside world. Oh yeah, there´s one more thing. Planking a clinker hull of a boat is being totally out of time and space and the dane becomes a viking and my house becomes Valhalla.

graduating the front plate of the fiddle

So here is where I am in real world time. I´ve just finished the graduation of the top. Here the problem was that some parts were to thin, so I can only try to make it as close as possible to the desired thickness and hopefully it´ll be "good enough"
The top I´´ve put upside down on the back and sides and with the small thumb planes and a scraper, I´m taking the plates down to the desired thickness, taking care that it´ll be thin enough all the way out towards the edge. On the photo you can see a Hacklinger guide which i use for checking the thickness while I work.
I can feel that this will be a fast build. I want to play......

Fluting the edges of the plates on the fiddle

I actually started building the fiddle some days ago, but wanted to finish the guitars before posting. After having inlayed the purfling I started to work the outside edges of the plates. There are two reasons for that. It looks good and it makes the transformation of the thickness from 4mm at the edges to 2,5 just inside the edges a lot smoother, giving a more open sound. (Thats what they say) If you make a drawing, its obvious.

Guitars 94 and 95 ready for FP.

Ok, here they are. Numbers 94 and 95. Ready for French polish. Hopefully they´ll have strings on in 3 weeks time (more or less)

more scraping and doggy is sleeping

Here I´m working on number 94. Both guitars are now almost finished and these are just some small touches. Again, scraping is relaxing. Doggy like it as well.

What to expect from a Stewmac fiddle kit

As I wrote a few days ago, the kit that I received from Stewmac.com wasnt what I had expected. Here´s what I got.
Some decent woods, 2nd or 3rd quality. Some flaming in the maple, a big black spot on the soundboard that can be seen on both sides and also a bit of runout on the lower bout. But in general wood that will sound. No problem there, and I didnt expect anything better.
And now to the not so good part. Both the top and the back was warped. Just some 3 - 4 mm each one, but not good at all. Besides, the sides were not square to the back. and in total, the top didnt fit very well to the back and sides part. There werent any "overhang" left. A violin/fiddle shoul have its top and back plates "overhanging the sides with 3mm.....
Worse even. The plate graduation was very uneven. This I expected.. But I didnt expect the plates to be TO THIN. Some spots 1,9mm is to thin and it makes graduation an enormous compromise or to say, impossible. Bad, just as well is the inner linings.. Look at the photo. VERY poor workmanship. And even worse, very thin. the total thickness of the sides and linings were under 2mm on some spots.
Besides that.. well, a flatsawn neck... and the rest ok..
Is this ok.. No... I contacted Stewmac and they promptly accepted to replace the kit. BUT I refused, because I wasnt in the mood for struggling with Spanish costum one more time. This kit took me 3 weeks to get through (and a lot of money) Besides, why another kit. The workmanship is so poor that I couldnt expect anything better and Stewmac has shown me that final control from their side is nonexistant, so I decided to stay with this (darn) kit.
After some days in my humidity controlled workshop, the top straightened out. And the back and sides, I left on a humid concrete floor for some days and then it became almost acceptable...
So here we go, building will start. It´ll be a fast one. I dont have to much respect for this kit and I want to play...
A lesson has been learnt. I´ll continue buy my little things from Stewmac, but they´ve taught me that they are no better than mr. whatever seller on Ebay