Bass bar fitted

So here´s the front with the bass bar fitted. Tomorrow I will shape it and finetune the plate.

f holes cut

Before final thicknessing the front, I have cut the f holes. It starts looking like something familiar.

Outside of the plates finished

here are the top and back plates. They are rough finished, but the final shape is there. the edges and the corners will be finished when the I´ve made the assembly of the body.

hollowing out the front and the back

Still working with the gouges. My right hand wrist is getting sour from this work.
On top the back being roughed out. The little holes are drilled with stop, so that I have a thickness of 5mm when I reach the bottom of those holes. Later on the back will be taken down to 2,5 - 4,5mm.
Below the front at 5mm thicmness. It will be taken down to 2,4 - 3,7mm

shaping the outside of the back

I´ve been slow with my updates of the blog, but I´ve working a lot. Here´s the first picture:

plates rough cut

So now the hard work starts. All wiil be shaped with hand tools from now on. They are still 16mm thick and will be taken down to 2,4 - 4,5mm.

starting the plates

So here the back and front plates have been joined. They are 16mm thick so there´s a lot of work to be done. the top to the left.