starting assembly

First thing is to join the soundboard to the neck. Here on #108

soundboard #106 braced

Here´s the braced soundboard. The other two guitars have identical bracing. Tomorrow I will start assembly.

Soundboard bracing part 2

Here I am gluing the harmonic bars, the closing struts and the under fingerboard reinforcement on #107

starting the bracing of the soundboard.

The soundboard already had the soundhole reinforcement and the bridge strap glued on. Here I´m gluing the fan braces on #108

Backs ready for assembly

Making little spirals

Now that I´ve finished the 4 guitars, I´m working full tome on the 3 guitars that will be finished in April/May.

#104 finished

And here´s number 104, a tight sounding blanca with an inlayed soundport. A really nice guitar.

guitars #102 and 103 finished

Here´s number 102, a 2A blanca.

And number 103, an Indian Rosewood negra with Pau ferro bindings to give an interesting contrast.

guitar #101 finsihed

So here is number 101, a beautifull Panama rosewood negra with inlayed soundport and mechanical pegs.
The back is not as red as it turned out on the photo.

gluing the bridge on number 101

I´m very close to finishing the 4 flamenco guitars that I´ve been building this winter. Gluing the bridge is the last assembly procedure. What is left is final polish and setup.

necks ready for assembly

From left to right, necks 106 - 107 - and 108. Still a lot to do before starting assembly, so they´ll just wait a little bit.